Kenwood f-MD7
| Name | f-MD7 |
|---|---|
| Manufacturer | Kenwood |
| Released | 2001/03 |
| Device type | auto |
| Recorder | Player |
| MDLP | Yes |
| NetMD | No |
| Hi-MD | No |
| Radio | Yes |
| Dimensions | 1-Din 178W x 50H x 160Dmm |
| Weight | 1600 |
| ATRAC ver | |
| Battery | |
| Sidecar battery | |
| Voltage | 12 |
| Power cable | |
| Price (launch) | |
| ¥52 500 |
|
| - | |
| Inputs | |
| Outputs | |
| Control |
“Fias” MDLP compatible MD receiver
Equipped with 3D moving picture display. Equipped with multitasking LSI typeQ. Equipped with 6-mode Easy-DSP. 3State NAVI MUTE. Built-in 47W x 4 high power amplifier. Equipped with System E's PRO. 1.6V high voltage RCA2 preouts (front, rear/non-fader). Equipped with AUX RCA input terminal. Equipped with a changer control terminal.
[MD department]
- Frequency response: 20Hz to 20kHz (±1dB)
- S/N ratio: 90dB (1kHz)
- Dynamic range: 90dB
- Stereo Separation: 85dB (1kHz)
[FM part]
- Receiving frequency range: 76.0MHz to 90.0MHz (100kHz steps)
- Practical sensitivity: 9.3dBf (0.8μV/75Ω)
- Frequency response: 30Hz to 15kHz (±3.0dB)
- Stereo Separation: 40dB (1kHz)
[AM section]
- Receiving frequency range: 522kHz to 1629kHz (9kHz steps)
- Sensitivity: 28dBμ
[Audio part]
- Maximum output: 47W x 4
- Rated output: 29W x 4 (4Ω, 1kHz, 10% THD)
- Pre-out level: 1600mV (CD/10KΩ)
[Common part]
- Power supply voltage: 14.4V (11-16V)
- Maximum current consumption: 10A
- Embedded dimensions: 178W x 50H x 160Dmm
- Mass: 1.6kg
Content adapted from: Kenwood Product Page Minidisc.org
Manuals
Repair
Photos
Submit your own! Edit the page, use the photo submission form, or Contact us.